AISI 5140 Steel Coil, JIS SCr440, DIN 1.7035
AISI 5140 steel is a widely used high-quality alloy structural steel, containing chromium carbides that are not easily dissolved, including round steel, steel plate and steel coil. The hardenability of AISI 5140 steel coil is good, this steel is suitable for cyanidation and induction hardening treatment in addition to quenching and tempering treatment. It is widely used in mechanical manufacturing industries, vehicles, engines and gears and other stressed parts that require hard wear-resistant surfaces. 5130 steel composition and more information is below.
| AISI 5140 Steel Coil Supply Range | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | Specification | ||||||||||||||||||
| Coil/Sheet/Plate | Customized according to customer requirements | ||||||||||||||||||
5140 Steel Coil Grade Equivalent Chart
| Country | China | USA | Germany/UK/France | ISO | Japan |
|---|---|---|---|---|---|
| Standard | GB/T 3077-1999 | ASTM A29/A29M-05 | EN 10083/3-2006 | ISO 683/1:1987 | JIS G4053-2008 |
| Grades | 40Cr (A20402) 40CrA (A20403) 40CrE (A20406) | 5140 | 41Cr4 (1.7035) | 41Cr4 | SCr440 |
5140 Steel Coil Chemical Composition
| STAND | Grade | C(%) | Mn(%) | P(%) | S(%) | Si(%) | Cr(%) | Ni(%) | Mo(%) | Cu(%) |
|---|---|---|---|---|---|---|---|---|---|---|
| GB/T 3077-1999 | 40Cr (A20402) | 0.37-0.44 | 0.50-0.80 | ≤0.035 | ≤0.035 | 0.17-0.37 | 0.80-1.10 | ≤0.30 | ≤0.15 | ≤0.30 |
| GB/T 3077-1999 | 40CrA (A20403) | 0.37-0.44 | 0.50-0.80 | ≤0.025 | ≤0.025 | 0.17-0.37 | 0.80-1.10 | ≤0.30 | ≤0.10 | ≤0.25 |
| GB/T 3077-1999 | 40CrE (A20406) | 0.37-0.44 | 0.50-0.80 | ≤0.025 | ≤0.015 | 0.17-0.37 | 0.80-1.10 | ≤0.30 | ≤0.10 | ≤0.25 |
| ASTM A29/A29M-05 | 5140 | 0.38-0.43 | 0.70-0.90 | ≤0.035 | ≤0.040 | 0.15-0.35 | 0.70-0.90 | - | - | - |
| EN 10083/3-2006 | 41Cr4 (1.7035) | 0.38-0.45 | 0.60-0.90 | ≤0.025 | ≤0.035 | ≤0.40 | 0.90-1.20 | - | - | - |
| ISO 683/1:1987 | 41Cr4 | 0.38-0.45 | 0.60-0.90 | ≤0.035 | ≤0.035 | 0.10-0.40 | 0.90-1.20 | - | - | - |
| JIS G4053-2008 | SCr440 | 0.38-0.43 | 0.60-0.90 | ≤0.030 | ≤0.030 | 0.15-0.35 | 0.90-1.20 | ≤0.25 | - | - |
1.7035 Steel Coil Physical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.85 g/cm³ | 0.284 lb/in³ |
5140 Steel Coil Mechanical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 570 MPa | 82700 psi |
| Yield strength | 295 MPa | 42800 psi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80 GPa | 11600 ksi |
| Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
| Izod Impact | 41.0 J | 30.2 ft.lb |
| Hardness, Brinell | 167 | 167 |
| Hardness, Knoop (converted from Brinell hardness) | 188 | 188 |
| Hardness, Rockwell B (converted from Brinell hardness) | 85 | 85 |
| Hardness, Vickers (converted from Brinell hardness) | 175 | 175 |
| Machinability (annealed and cold drawn, based on 100 machinability for AISI 1212 steel) | 65 | 65 |
Hot Sale Products
AISI 5140 Steel Coil Application
5140 steel is one of the most popular steel grades in the industry. After Q+T heat treatment, it is usually used to make various mechanical parts. Such as gears, shafts of machine tools, steering knuckles of automobiles, spline shafts, worms, etc. It is also used to manufacture parts that are subjected to high load, impact and moderate speed work, and parts with high surface hardness and wear resistance, etc.
ASTM 5140 Steel Coil Characteristics
1. After quenching and tempering, 40Cr steel can obtain good comprehensive mechanical properties and good low temperature impact toughness.
2. The hardenability is very good, and the machinability is also very good.
3. Easy processing, good toughness and plasticity.
4. High hardness and very wear-resistant.
5. High heat resistance
6. More sensitive to mechanical and heat treatment than carbon steel
AISI 5140 Steel Heat Treatment
1. SAE 5140 Noramlizing
Temperature: 840-880℃.
Welding is generally performed in the annealed (normalized) state.
2. Steel Grade 5140 Annealing
Heat slowly to 680-720°C and allow enough time for the steel to fully heat, then cool slowly in the furnace. Alloy steel will get MAX 241HB (Brinell hardness).
3. Hardening Of 5140 Alloy Structural Steel
Heat slowly to 820-860°C, then quench in water or oil after soaking well at this temperature. Temper the tool as soon as it reaches room temperature.
4. 5140 Steel Materials Tempering
Tempering at 550~570℃ .
5140 Steel Forging
Hot forming temperature: 1050-850℃
Initial forging temperature: 1150℃
Final forging temperature: 850℃
Forging ratio: above 4:1
Post-forging treatment: 5140 steel should be slowly cooled in sand.
5140 Steel Coil Supply
5140 steel is a high-quality low-carbon, low-alloy chromium, molybdenum, nickel case-hardening steel, equivalent to GB 40Cr, JIS SCr440, DIN 1.7035 steel. 5140 steel coil has lower carbon content and better mechanical properties. Songshun is a professional 5140 steel coil supplier, with stock in stock, complete sizes and types, fast delivery and price advantage. Contact us for any AISI 5140 steel material requirements and best 5140 grade steel prices.
Our Advantage
Manufacturing
With 7000 tons of hydraulic forging press, electric slag furnace and other high-end production equipment, we produce a great variety of steels with the best quality in China.
Testing
In order to control the quality, we have complete testing methods to make sure satisfy the customer needs, including Chemical Analysis, Ultrasonic Test and so on.
Massive Stock
We keep a mass stock are over 20000 tons for various steel type, including steel round bar, steel sheet, alloy steel, carbon steel, stainless steel, mold steel, steel coil and etc.
Customized Service
With a professional steel engineers team, we provide customized service according to your project drawing, also provide professional project experience for your special project, such as materials, processing conditions and etc.
World Wide Delivery
For container shipment, standard packing and bundle round bar and flat bar would be applied. It is necessary to fasten & reinforcement would be done to ensure the safety and better unloading at the destination port.
For less than container shipment, wooden box package would be applied for different size materials. For milled or grounded materials, the anti-rust oil would be needed to ensure the surface condition, within the wooden box.
