all size 5140 steel plate sheet on sale
5140 steel
AISI 5140 Steel Round Bar
AISI 5140 Steel
Songshun Steel Plate Storehouse
40Cr Steel Plate
all size 5140 steel plate sheet on sale
5140 steel
AISI 5140 Steel Round Bar
AISI 5140 Steel
Songshun Steel Plate Storehouse
40Cr Steel Plate

AISI 5140 Steel Round Bar Plate Sheet, DIN 1.7035, JIS SCr440

AISI 5140 steel also can be called JIS Scr440 and DIN 1.7035 steel. It is one of the alloy steel as well as the most popular steel grades in the productions of the machine. AISI 5140 steel round bar price is on the medium level and it was easy to processing. After tempering and quenching, the toughness, plasticity and wearing resistance of it will get better. Steel normalizing can make the spheroidizing for the organization of steel get easier. And it will raise the machinability of the semi-finished product with the hardness less than 160HBS. Tempering it at the temperature of 550℃-570℃ which can make it get better mechanical property. And the hardenability of it is higher than S45C steel. You can check 5140 Steel chemical composition and mechanical properties as below.

AISI 5140 Steel Round Bar Sheet Plate Supply Range
TypeSpecificationSurface
Round BarDiameter:20–300mm; Length: Can be customized;
As per given requirements.
Black, Peeled, Machined(Turned), Polished(Grounded)
As per given requirements.
Sheet/Plate/Slab Thickness: 10-200mm; Width: 300-2000mm;
Length:Can be customized;
As per given requirements.
Black, Peeled, Machined, Polished(Ground, Grinded, Milled)
As per given requirements.

5140 Steel Grade Equivalent Chart

Country China USA Germany/UK/France ISO Japan
Standard GB/T 3077-1999 ASTM A29/A29M-05 EN 10083/3-2006 ISO 683/1:1987 JIS G4053-2008
Grades 40Cr (A20402) 40CrA (A20403) 40CrE (A20406) 5140 41Cr4 (1.7035) 41Cr4 SCr440

5140 Steel Round Bar Chemical Composition

STAND Grade C(%) Mn(%) P(%) S(%) Si(%) Cr(%) Ni(%) Mo(%) Cu(%)
GB/T 3077-1999 40Cr (A20402) 0.37-0.44 0.50-0.80 ≤0.035 ≤0.035 0.17-0.37 0.80-1.10 ≤0.30 ≤0.15 ≤0.30
GB/T 3077-1999 40CrA (A20403) 0.37-0.44 0.50-0.80 ≤0.025 ≤0.025 0.17-0.37 0.80-1.10 ≤0.30 ≤0.10 ≤0.25
GB/T 3077-1999 40CrE (A20406) 0.37-0.44 0.50-0.80 ≤0.025 ≤0.015 0.17-0.37 0.80-1.10 ≤0.30 ≤0.10 ≤0.25
ASTM A29/A29M-05 5140 0.38-0.43 0.70-0.90 ≤0.035 ≤0.040 0.15-0.35 0.70-0.90 - - -
EN 10083/3-2006 41Cr4 (1.7035) 0.38-0.45 0.60-0.90 ≤0.025 ≤0.035 ≤0.40 0.90-1.20 - - -
ISO 683/1:1987 41Cr4 0.38-0.45 0.60-0.90 ≤0.035 ≤0.035 0.10-0.40 0.90-1.20 - - -
JIS G4053-2008 SCr440 0.38-0.43 0.60-0.90 ≤0.030 ≤0.030 0.15-0.35 0.90-1.20 ≤0.25 - -

1.7035 Steel Physical Properties

Properties Metric Imperial
Density 7.85 g/cm³ 0.284 lb/in³

5140 Steel Mechanical Properties

Properties Metric Imperial
Tensile strength 570 MPa 82700 psi
Yield strength 295 MPa 42800 psi
Elastic modulus 190-210 GPa 27557-30458 ksi
Bulk modulus (typical for steel) 140 GPa 20300 ksi
Shear modulus (typical for steel) 80 GPa 11600 ksi
Poisson’s ratio 0.27-0.30 0.27-0.30
Izod Impact 41.0 J 30.2 ft.lb
Hardness, Brinell 167 167
Hardness, Knoop (converted from Brinell hardness) 188 188
Hardness, Rockwell B (converted from Brinell hardness) 85 85
Hardness, Vickers (converted from Brinell hardness) 175 175
Machinability (annealed and cold drawn, based on 100 machinability for AISI 1212 steel) 65 65

5140 Steel Application

After hardening and tempering, it can be used to make the fittings for machines with high medium load and speed of work. Such as the automobile knuckle, gear wheel and axis of the machine tools. If it had been quenching and tempering with medium temperature, it will be a great choice for fittings with high load, low impact and good wearing resistance. Such as the gear wheel, lantern ring and etc. And after quenching and low-temperature tempering, the properties will be better than the last one. People usually use it to make the parts with good wearing resistance and handle high load, low impact. And you can see the principal axis, mechanical bolt and etc are made of it.

5140 Steel Sheet Plate Round Bar Heat Treatment

The ways of heat treatment for 1.7035 steel are normalizing, annealing, quenching, tempering and etc.

(1)Quenching it at the temperature of 850℃ and oil cooling.

(2)Tempering at the temperature of 520℃, then water-cooling and oil cooling.

After quenching, the surface hardness of it is 52-60HRC.

Nitrogen Treatment
5140 steel can nitriding, and the elements of it are good for nitriding. After nitriding, it can get higher surface hardness. And after nitriding, hardening and tempering, the max hardness can up to 72-78HRA. And the hardness of core will be 43-55HRC.

Nitrogen Process
1.Forging
2.Annealing
3.Rough machining
4.Hardening and tempering
5.Finish machining
6.Stress relieving
7.Rough grinding
8.Nitriding
9.Lapping
We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements.

Test

How is ASTM 5140 steel tested?

AISI 5140 Steel Chemical Composition Testing-Spectrometer

We are sae 5140 Alloy Structural Steel for composition testing using spectrometer.The spectrometer one-time excitation of the sample to analyze its composition method is widely accepted by the public at this stage.Compared with traditional analytical methods, the advantages of spectrometers for the detection of modern steel components are fast, accurate and efficient. This method can directly inject solid samples without chemical digestion, which can reduce the human error caused by the digestion process and the constant volume process; to good quality steel.

We ensure the quality of each piece of steel and strictly control the quality inspection. We have focused on the production of 5140 steel for more than ten years. We are a professional, experienced and powerful steel supplier. Please do not hesitate, we will give you satisfactory service and quality.

Our Advantage