1.2714 55NiCrMoV7 L6 Steel Material Round Bar Sheet Plate
DIN 1.2714 mold steel was made at the base of DIN 1.2344 mould steel. So it has the advantages of 2344 steel and has better properties. L6 steel has good toughness and malleability. And it also is added the chromium to improve the toughness and fatigue resistance of the 2714 steel material. The Cr content of it is quite high, so it has great hardenability. And air cooling in the time of quenching will get the martensite structure. But its carbon content is on the medium level to make sure to get good hardness after the quenching and tempering. Meanwhile, 1.2714 steel will get good thermostability and high impact toughness. It will get secondary hardening in the high-temperature tempering, then its wearing resistance, corrosion resistance and thermal fatigue resistance will get improve.
So 2714 steel material has good properties after quenching and tempering. But if the surface of steel gets a carbon-denuded layer, it will damage the thermal fatigue resistance.
1.2714 55NiCrMoV7 L6 Steel Material Round Bar Sheet Plate
DIN 1.2714 mold steel was made at the base of DIN 1.2344 mould steel. So it has the advantages of 2344 steel and has better properties. L6 steel has good toughness and malleability. And it also is added the chromium to improve the toughness and fatigue resistance of the 2714 steel material. The Cr content of it is quite high, so it has great hardenability. And air cooling in the time of quenching will get the martensite structure. But its carbon content is on the medium level to make sure to get good hardness after the quenching and tempering. Meanwhile, 1.2714 steel will get good thermostability and high impact toughness. It will get secondary hardening in the high-temperature tempering, then its wearing resistance, corrosion resistance and thermal fatigue resistance will get improve.
So 2714 steel material has good properties after quenching and tempering. But if the surface of steel gets a carbon-denuded layer, it will damage the thermal fatigue resistance.
L6 Steel Round Bar Sheet Plate Supply Range | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Specification | Surface | |||||||||||||||||
Round Bar | Dia: 8mm-800mm; Length: Can be customized | Black, Rough Machined,Turned or as per given requirements | |||||||||||||||||
Sheet/Plate/Slab | Thickness: 2mm–300mm; width: 200mm – 800mm | Black, Rough Machined,Turned or as per given requirements |
2714 Steel Grade Equivalent
Country | CHINA | USA | JAPAN | GERMANY/UK/France | ISO |
---|---|---|---|---|---|
Standard | GB/T 1299-2000 | ASTM A681-08 | JIS G4404-2006 | EN ISO 4957-1999 | ISO 4957:1999 |
Grades | 5CrNiMo (T20103) | L6 (T61206) | SKT4 | 55NiCrMoV7 (1.2714) | 55NiCrMoV7 |
L6 Steel Chemical Composition
STAND | Grade | C(%) | Mn(%) | P(%) | S(%) | Si(%) | Cr(%) | Mo(%) | Ni(%) | V(%) |
---|---|---|---|---|---|---|---|---|---|---|
GB/T 1299-2000 | 5CrNiMo (T20103) | 0.50-0.60 | 0.50-0.80 | MAX 0.030 | MAX 0.030 | MAX 0.40 | 0.50-0.80 | 0.15-0.30 | 1.40-1.80 | |
ASTM A681-08 | L6 (T61206) | 0.65-0.75 | 0.25-0.80 | MAX 0.030 | MAX 0.030 | 0.10-0.50 | 0.60-1.20 | MAX 0.50 | 1.25-2.00 | |
JIS G4404-2006 | SKT4 | 0.50-0.60 | 0.60-0.90 | MAX 0.030 | MAX 0.020 | 0.10-0.40 | 0.80-1.20 | 0.35-0.55 | 1.50-1.80 | 0.05-0.15 |
EN ISO 4957-1999 | 55NiCrMoV7 (1.2714) | 0.50-0.60 | 0.60-0.90 | MAX 0.030 | MAX 0.020 | 0.10-0.40 | 0.80-1.20 | 0.35-0.55 | 1.50-1.80 | 0.05-0.15 |
ISO 4957:1999 | 55NiCrMoV7 | 0.50-0.60 | 0.60-0.90 | MAX 0.030 | MAX 0.020 | 0.10-0.40 | 0.80-1.20 | 0.35-0.55 | 1.50-1.80 | 0.05-0.15 |
1.2714 Steel Physical Properties
Physical Properties | Metric | Imperial |
---|---|---|
Density | 7.86 g/cm³ | 0.284 lb/in³ |
Melting point | 2590°F | 1421°C |
1.2714 Steel Mechanical Properties
Mechanical Properties | Metric | Impetial |
---|---|---|
Poisson's ratio | 0.27- 0.30 | 0.27- 0.30 |
Elastic modulus | 190-210 GPa | 27557-30457 ksi |
Hot Sale Products
1.2714 55NiCrMoV7 L6 Steel Material Application
Compare with the 5CrNiMo, 1.2714 steel has bigger vanadium content. So its structure get refining to improve the grain size of steel, and the wearing resistance of steel will be better. So it has various applications in the industry. You can learn something about applications as below.
1.Forming Dies and Tools
2.Punches
3.Hot Shear Knives
4.Bending and Embossing Tools
5.Hot Extrusion Tooling
6.Hot Forging and Hammer Dies
7.Hot Gripper Dies, and Hot Shear Blades
8.Dies for Drop Forging Hammers & Mechanical
9.Presses Die Molds
10.Die Holder
11.Piston Rods
12.Cranks
13.Boaster
14.Shearing Blades
15.Plastic Molds
16.High-pressure Shaft
17.Piercers
18.Hot Forging and Pressing Tools for Steel and Metal
1.2714 Steel Characteristics
1.Good toughness, strength and high wearing resistance.
2.Good hardenability. After 820℃ oil quenching and 560℃ tempering, the hardness of everywhere is almost the same.
3.Good polishing performance and heat-resisting property, good for the surface treatment.
4.Great machinability. Easy to processing.
AISI L6 Steel Heat Treatment
Forging
L6 tool steels are forged at temperatures between 1079°C (1975°F) and 871°C (1600°F).
Hardening
Preheating: Heat L6 steel to 621-677°C (1150-1250°F) and equilibrate. Soak for 30 minutes for the first inch of thickness and 15 minutes for each additional inch.
Tempering
Temper immediately after quenching, and when tempering at 204°C (400°F), hold at that temperature for a minimum of 4 hours, then air cool to ambient temperature.
To minimize the possibility of cracking, steel should be tempered immediately after hardening and should be heated slowly to the required tempering temperature.
Annealing
L6 tool steels are annealed at 788°C (1450°F) followed by slow cooling at a rate of up to 4°C (40°F) per hour.
1.2714 55NiCrMoV7 L6 Steel Round Bar Sheet Plate Supply
We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements.
We are a professional special steel stockist and supplier with a high-quality stand for many years. As a professional steel supplier, we can supply L6 steel for your different applications as above. If you need technical guide, we also can be your strong support, please contacts us for any request for it. Songshun Steel always with you.
Our Advantage
Manufacturing
With 7000 tons of hydraulic forging press, electric slag furnace and other high-end production equipment, we produce a great variety of steels with the best quality in China.
Testing
In order to control the quality, we have complete testing methods to make sure satisfy the customer needs, including Chemical Analysis, Ultrasonic Test and so on.
Massive Stock
We keep a mass stock are over 20000 tons for various steel type, including steel round bar, steel sheet, alloy steel, carbon steel, stainless steel, mold steel, steel coil and etc.
Customized Service
With a professional steel engineers team, we provide customized service according to your project drawing, also provide professional project experience for your special project, such as materials, processing conditions and etc.
World Wide Delivery
For container shipment, standard packing and bundle round bar and flat bar would be applied. It is necessary to fasten & reinforcement would be done to ensure the safety and better unloading at the destination port.
For less than container shipment, wooden box package would be applied for different size materials. For milled or grounded materials, the anti-rust oil would be needed to ensure the surface condition, within the wooden box.
Manufacturing
With 7000 tons of hydraulic forging press, electric slag furnace and other high-end production equipment, we produce a great variety of steels with the best quality in China.
Testing
In order to control the quality, we have complete testing methods to make sure satisfy the customer needs, including Chemical Analysis, Ultrasonic Test and so on.
Massive Stock
We keep a mass stock are over 20000 tons for various steel type, including steel round bar, steel sheet, alloy steel, carbon steel, stainless steel, mold steel, steel coil and etc.
Customized Service
With a professional steel engineers team, we provide customized service according to your project drawing, also provide professional project experience for your special project, such as materials, processing conditions and etc.
World Wide Delivery
For container shipment, standard packing and bundle round bar and flat bar would be applied. It is necessary to fasten & reinforcement would be done to ensure the safety and better unloading at the destination port.
For less than container shipment, wooden box package would be applied for different size materials. For milled or grounded materials, the anti-rust oil would be needed to ensure the surface condition, within the wooden box.