Songshun Steel & TOP Steel Manufacturer Supplier in China

Effects of Cold Working on GB 30CrMnSi Steel Round Bars

GB 30CrMnSi material is a quenched and tempered structural steel with excellent comprehensive properties, and is an ideal material for many industrial scenarios. In addition, at Songshun, GB 30CrMnSi steel round bars are key technologies for improving their structure and performance through cold working processes such as cold drawing, cold rolling, and cold extrusion. But do you really understand the impact of cold working processes on its structure and performance? This article will reveal the impact of the main cold working processes on 30CrMnSi steel.

Cold Drawing Process

Cold drawing involves pulling the GB 30CrMnSi steel round bars through a die to reduce its diameter and increase its length, which is like “slimming down” the steel round bar. This process brings about changes in its internal structure and performance.

  • In Terms Of Structure

After this process, the material’s structure becomes denser, the grains are refined, and they are elongated along the drawing direction to form a fibrous structure. The dislocation density will continue to increase, surging by 10^4 times (observed through TEM dislocation network), the number of subgrain boundaries increases, and the grain size can be refined to the micrometer level.

  • In Terms Of Performance

Cold drawing causes significant internal stress in the 30CrMnSi steel round bar, further refines the grains, significantly improves the strength and hardness, and at the same time enhances the surface finish and dimensional accuracy. This process is particularly suitable for applications requiring high precision and high strength.

Cold Upsetting Process

Cold upsetting is a process in which impact force or pressure is applied to 30CrMnSi steel at room temperature to cause plastic deformation, thereby forming the required shape and size. Meanwhile, it brings about a series of influences and changes to the structure and performance of the steel.

  • In Terms Of Structure

During the cold upsetting process, the metal material of GB 30CrMnSi steel round bars will flow, and the internal grains will be redistributed and undergo preferred orientation along a specific direction, thus forming a deformed texture. In addition, grain refinement will occur in areas with large deformation.

  • In Terms Of Performance

The change in structure leads to a significant improvement in the strength and hardness of the 30CrMnSi round bar in local areas after cold upsetting, while maintaining good plasticity and toughness. This meets the requirements for fasteners in manufacturing, which need sufficient strength to fix components and the ability to withstand certain impacts. Moreover, the residual compressive stress generated by cold upsetting can delay the initiation and propagation of fatigue cracks, thereby improving fatigue life. However, if cracks appear on the surface or there is large residual tensile stress during the cold upsetting process, the fatigue performance will be reduced instead.

Cold Rolling Process

As one of the common cold working processes, cold rolling mainly deforms the steel at room temperature through the pressure of a rolling mill, reducing the thickness and increasing the length.

  • In Terms Of Structure

After the cold rolling process, the grain size of the surface layer of the GB 30CrMnSi bar is refined to 2μm (analyzed by electron backscatter diffraction). The grains are flattened and elongated along the rolling direction, forming a fibrous structure. Its surface roughness Ra value reaches 0.2μm (3D morphology measured by white light interferometer), and the dislocation density increases significantly, which promotes strengthening.

  • In Terms Of Performance

The compressive strength, fatigue resistance and wear resistance of the GB 30CrMnSi steel round bars can be enhanced, enabling it to better withstand loads and friction during work. However, if cold rolling is excessive, it is prone to fracture during subsequent processing or use. In addition, the hardness and surface finish are also improved, making it easier to handle in subsequent processing.

Cold Extrusion Process

Cold extrusion is a process in which a huge pressure is applied to the material, causing it to undergo plastic deformation through a die to form the desired shape.

  • In Terms Of Structure

In terms of structure, after the cold extrusion process of GB 30CrMnSi steel round bars, severe plastic deformation and recrystallization occur inside the steel. Such deformation and recrystallization help make the structure denser and the grain refinement more obvious.

  • In Terms Of Performance

In terms of performance, the cold extrusion process can significantly improve the strength and hardness of 30CrMnSi while maintaining good toughness and plasticity. Moreover, it can also improve the uniformity of its mechanical properties and surface quality.

Conclusion

To summarize, cold working has a significant impact on the structure and properties of GB 30CrMnSi steel round bars. There are various cold working processes for 30CrMnSi steel round bars. By selecting appropriate cold working processes and parameters, their structural organization can be optimized, mechanical properties can be enhanced, while ensuring good surface quality and dimensional accuracy. However, during the cold working of GB 30CrMnSi round bars, attention should also be paid to issues such as lubrication and cooling, control of processing deformation, and quality. Only in this way can their potential be fully exploited, providing high-quality material support for customers and industrial applications.

Songshun Steel-Logo

Dongguan Songshun Mould Steel Co., Ltd.

Welcome to contact us at any time through the following ways
Or you can email directly to  sales@songshunsteel.com