Songshun Steel & TOP Steel Manufacturer Supplier in China

Comprehensive Guide to 6061 Aluminum Alloy

What is 6061 aluminum alloy? It is a heat-treatable strengthened alloy of the Al-Mg-Si series. With its advantages of high strength, excellent adaptability, lightweight properties and corrosion resistance, it has become one of the most widely used aluminum alloys worldwide. It meets the high-precision demands of aerospace, the lightweight requirements of 3C electronics, and the aesthetic needs of architectural decoration, among others, earning it the reputation as the “universal alloy” in the industry. This article provides a comprehensive guide to 6061 aluminum materials supplied by Songshun from multiple perspectives, helping you source the right materials with confidence.

6061 Aluminum Alloy Chemical Composition

6061 Aluminum Alloy Chemical Element Composition Content (%)
FeSiMnCrCuTiZnMgOther SingleOther TotalsMore
≤0.700.40-0.80≤0.150.04-0.350.15-0.40≤0.15≤0.250.80-1.20≤0.05≤0.15Al: Balance

The above refers to the chemical composition of 6061 aluminum alloy in accordance with GB/T 3195-2016. It is mainly aluminum-based, with magnesium and silicon forming the core strengthening phases, while a small amount of auxiliary elements is added to adjust its properties, strictly complying with international standards. As can be seen from the table, aluminum (Al) is present as the balance element, forming the alloy matrix and determining its basic physical properties, such as lightweight characteristics, electrical conductivity and thermal conductivity. Magnesium (Mg) is the key component of the strengthening phase, which enhances strength and hardness, improves corrosion resistance, and is critical for heat treatment. Silicon (Si) reacts with Mg to form the Mg₂Si strengthening phase, which increases strength via heat treatment and improves machinability. Other auxiliary elements, including copper (Cu), chromium (Cr) and manganese (Mn), each perform distinct functions, endowing the alloy with multiple excellent properties and achieving an outstanding overall property balance.

GB 6061 Aluminum Alloy Properties

(1) Mechanical Properties of 6061 Aluminum Alloy

The mechanical properties of 6061 aluminum alloy vary significantly with different heat treatment conditions, such as T4, T6, T651, etc. The typical mechanical properties under common tempers are as follows:

  • Tensile Strength: generally in the range of 276 – 310 MPa
  • Yield Strength: generally in the range of 240 – 276 MPa
  • Elongation: generally in the range of 8% – 12%
  • Hardness: Brinell Hardness (HB) generally in the range of 95 – 105
  • Young’s Modulus: 68.9 GPa

It should be emphasized that properties of 6061 aluminum alloy sheets and extruded profiles differ slightly, and specific values may vary depending on production batch, dimensions, specifications and other factors.

(2) Performance Characteristics of 6061 Aluminum Alloy

  • High strength
  • Light weight
  • Excellent corrosion resistance
  • Strong adaptability, high thermal and electrical conductivity
  • Good machinability and flexible surface treatment
  • Good toughness and heat treatability
  • Environmentally friendly and recyclable

Aluminum 6061 Alloy Applications

6061 aluminum alloy is mainly used in automotive, rail transit, aerospace, 3C electronics, mold manufacturing, architectural decoration, machinery and equipment, shipbuilding and marine engineering, among other fields. It is commonly used to manufacture a variety of components including chassis protection parts, high-speed rail doors, satellite brackets, laptop housings, molds, door and window profiles, bicycle frames, drive shafts, and so on.

6061 Aluminum Alloy Production Process Specification

1.Melting Process: Our 6061 aluminum alloy is typically melted and refined using high-purity aluminum ingots, pre-alloyed master alloys, and recycled aluminum scrap. This ensures uniform chemical composition, reduces segregation, removes hydrogen gas and non-metallic inclusions from the melt, improves metallurgical purity, and guarantees a homogeneous ingot structure.

2.Casting Process: Ingots or directly rolled billets are produced via semi-continuous casting or continuous casting and rolling. Controlling casting speed and cooling rate is critical to ensuring ingot quality.

3.Forging / Rolling Process: Forging or rolling is employed to form aluminum products into the required shape and size. These processes refine grain structure, eliminate casting defects, and significantly improve material density and mechanical properties.

4.Heat Treatment Process: Common heat treatment methods for this alloy include solution heat treatment and age hardening, to further enhance its mechanical properties.

6061 Aluminum Alloy Supply Range

1. Product Forms: At Songshun, in addition to standard 6061 aluminum alloy products such as plates, sheets, round bars, pipes, flat bars, wires, profiles and strips, we also supply special forms including blocks, forgings and ring parts. All products can be customized according to specific requirements to flexibly meet various application scenarios.

2. Specifications: Generally, 6061 aluminum alloy round bars: Φ3–500 mm × 3500–6000 mm; 6061 aluminum alloy plates: 0.2–250 mm (thickness) × 600–2500 mm (width) × 3500–6000 mm (length). We support customized specifications to meet different customer demands.

3. Temper Conditions: According to different processing requirements, we supply various tempers including O, T4, T6, T651, H112 and other heat treatment conditions.

4. Processing Capabilities:

  • CNC precision machining: milling, turning, drilling, tapping, etc.
  • Cutting: sawing, CNC cutting.
  • Surface treatment: anodizing, sandblasting, wire drawing, painting, film coating, electrophoresis, etc.

6061 Aluminum Alloy FAQ

Q1: What is the density of 6061 aluminum alloy?

A: The density of 6061 aluminum alloy is 2.70 g/cm³ (0.0975 lb/in³), which is about 34% that of carbon steel (7.85 g/cm³). It is a typical lightweight structural material.

Q2: What is the difference between 6061-T6 and 6061-T651?

A: T651 is produced based on the T6 temper, with controlled stretching (1.5–3%) to remove residual internal stress. T651 has slightly higher tensile strength than T6; more importantly, machining distortion is reduced by more than 50%, providing much higher dimensional stability, making it ideal for high-precision CNC machined parts.
By comparison, T6 has higher internal stress and tends to deform during direct machining.

If your product requires precision machining later, T651 is strongly recommended. If used mainly for welded structures or non-precision applications, T6 is sufficient and more cost-effective.

Q3: Can 6061 aluminum be anodized?

A: Yes, and it performs excellently.
6061 responds uniformly to anodizing and supports various treatments such as coloring, hard anodizing, etc. It is widely used in consumer electronics housings and architectural profiles.

Q4: Is 6061 aluminum alloy weldable?

A: Yes. 6061 has excellent weldability, but strength in the heat-affected zone will decrease after welding. T6 temper re-treatment is recommended to restore performance as required by design.

Q5: Which supplier of 6061 aluminum alloy is the best choice?

A: Songshun is your best supplier for 6061 aluminum alloy.
We manufacture a full range of aluminum products with complete specifications and high cost performance. We are committed to providing high-quality aluminum materials for customers worldwide.

Conclusion

Through the in-depth analysis in this article, we believe you have gained a comprehensive and thorough understanding of 6061 aluminum alloy. It is not just a metallic material; with its exceptional properties, it provides strong support for a wide range of industries. At Songshun, we supply high-performance GB 6061 aluminum alloy and are committed to ensuring that the quality and performance of our materials are optimized to the highest standard.

Songshun Steel-Logo

Dongguan Songshun Mould Steel Co., Ltd.

Welcome to contact us at any time through the following ways
Or you can email directly to  sales@songshunsteel.com